Hardware

The open joint-stock company “Forging Heavy Stamping Plant” was founded in 1979, it was included in the number of operating enterprises on January 1, 1982, and is part of the BELAVTOMAZ holding. The organization carries out the following activities: production of general machine-building units and parts; production of finished metal products or semi-finished products by forging, pressing, stamping and rolling. 

JSC "Belarusian metallurgical plant" was put into operation in 1984. Today this unique enterprise is one of the best metallurgical enterprises not only in Belarus, but also all over the world.

Open Joint-Stock Company "Bobruisk Plant of Tractor Parts and Units" is a modern enterprise that has grown from a small workshop to one of the leaders in Belarusian agricultural machinery manufacturing. Since 2014, the company has been part of the MTZ-HOLDING holding company. BELARUS tractors have earned the trust of not only Belarusian consumers but are also known and loved for their quality and reliability throughout the world: North and South America, Africa, Southeast Asia, the Middle East, the CIS countries, and throughout Russia.

For those who value high quality and reliability, the SITOMO tool plant offers a wide range of its products. For more than half a century, the company has been successfully operating in the metalwork and assembly market. The high level of production, great engineering potential accumulated over many years of work, allow us to produce tools that are of high quality and ease of use. It is manufactured from special chromium and chrome vanadium steel, semi-hot extrusion and hot forging. For finishing, broaching, rolling, calibration are used. In addition, the products are subjected to special heat treatment, and various types of electroplating protect them from corrosion. 

"Belmash Factory" JLLC is a young enterprise that in a short time managed to acquire a good reputation and take a rightful place in woodworking products market. The company specializes in the development and manufacturing of multifunctional equipment for processing of wood and wood-chip materials at a country house or a cottage. The company's objective is creation high-quality tools capable of performing widest range of tasks and minimizing the cost of such equipment. Belmash company has a network of sales representation in many regions of Russia. Manufacturing premises are located in Mogilev city, Republic of Belarus.

Production Private Unitary Enterprise "Victoria" is a leader in the production of cast aluminum cookware in Belarus. The company was established on February 23, 1998. The main activity is the production of cast cookware and aluminum castings for industrial and technical purposes according to the first porosity grade. The company has its own production workshops with modern metalworking and foundry equipment with an area of ​​about 8,000 m2, located in Luninets, Brest region of the Republic of Belarus. The company also provides services for the production of aluminum castings for technical purposes, application and restoration of non-stick coating.  

Dangi Profile Сompany limited liability company is one of the leading industrial enterprises in the Republic of Belarus on production of electric welded pipes of round and profile sections. To date, the production capacity of the company allows to produce up to 5000 tons of electric welded pipes per month. The company is equipped with computerized equipment of Turkish production. Currently, LLC "Dangi Profile Сompany" has two warehouses in the territory of Gomel, its own fleet of trucks and more than 1000 products.

Close joint-stock company “Tanis” is specialized in producing of such metal ware goods as metal polymeric and rust-resistant rope, “Trellis Tanis” rope, fibre for concrete reinforcement and household cord. Our products gained its popularity in the international market long time ago. The point is that they are not just highly competitive on the main technical data with ordinary metal ware goods, but they are also much more profitable acquisition. Shortest terms of order fulfilment and flexible prices policy make close joint-stock company “Tanis” a perfect business partner. 

In response to numerous requests from individual winegrowers and amateur gardeners, we launched a high-strength garden cable (trellis cable).

SINTOMS Ltd. is an East European company producing parts for musical instruments  and selling musical instruments and accessories for them, facilitating the musical instruments manufacture and development of musical culture. SINTOMS  is a leader in manufacture and delivery of frets for Central and Eastern Europe. The Company’s products are exported to dozens of countries in the world, including Germany, Spain, France, Italy, USA and many others. The Company is registered in the International List of suppliers of the musical instruments parts in USA. The Company’s products are included into the European Catalogue of quality component parts for musical instruments in Germany. 

Joint-Stock Company "Mogilev Metallurgical Works" is the largest produсers of steel tubes in the Republic of Belarus. Main products (steel electro welded round and profile cross-section tubes, water and gas supplying tubes, unclosed galvanized profiles for system of windows from PVC) are delivered to the countries of Europe (Germany, Poland, Czech Republic, Bulgaria, Sweden, the Netherlands, Rumania, Hungary, Finland, Slovakia), CIS, Baltic Countries. 

Aluminum for deoxidation, grade AV87, produced by BELTSVETMET OJSC, is used for steel deoxidation, in aluminothermic processes, and in the production of ferroalloys and master alloys with rare earth and other rare metals. Deoxidation is the process of reducing the oxygen content in a metal or bonding it into strong compounds. Aluminum in various forms, typically wire or ingots of various shapes, is used as a base for deoxidation of many steels. Using this metal helps produce fine-grained steel with optimal elasticity and toughness. We guarantee compliance with GOST 295-98 and competitive pricing for our products. 

LLC "AVERLIT" produces plain bearings, bronze bushings for industrial engines, as well as bushings, bumpers, rings made of bronze grades BrO4Ts4S17, BrO5Ts5S5 (GOST 613-79), brass L63 (GOST 15527-70), cast iron ni-resist (GOST 7969-82), intended for use in installations of electric centrifugal pumps (UESP) of Russian and foreign manufacturers. The manufactured products are intended for the assembly and repair of installations of electric centrifugal pumps, have high antifriction properties and are used for mechanisms operating under high loads in an aggressive environment. 

“Mechanica” is a manufacturer of parts and equipment for the aviation, automotive, aerospace, electro-optics and pharmaceutical industries. We manufacture parts of increased complexity, produce assembly units and develop and manufacture non-standard process equipment. We have all the necessary certificates guaranteeing high quality of products. We work with customers from Germany, Holland, Poland, Russia, USA, Switzerland and France. 

JSC "Beltsvetmet" is the largest enterprise in the Republic of Belarus that specializes in the procurement and processing of scrap and waste of non-ferrous metals, has its own foundry and fully meets the needs of industrial enterprises of the country for non-ferrous metals , at prices cheaper than foreign analogs and not inferior to them in quality. 

BELTSVETMET OJSC offers LS-grade cast brass, a copper-zinc alloy whose main alloying element is zinc. LS-grade cast brass is used in mechanical engineering, instrument making, and many other industries. LS-grade cast brass is available in ingots (bars), packaged in bundles weighing up to 1.2 tons, in accordance with GOST 1020-97. Brass ingots are often used in heavy industry (aircraft and shipbuilding). The alloy is widely used for the subsequent production of bearings, bushings, various components, pipes, strips, rods, sheets, and many other components. 

The Legmash Plant is located in Orsha, one of the largest industrial centers in the Vitebsk Region of the Republic of Belarus, at the intersection of key international highways: the M1/E30 (Berlin-Brest-Moscow) and the M8/E95 (St. Petersburg-Odessa). This location allows the company to effectively interact with partners and clients both domestically and internationally. In February 2024, Legmash Plant OJSC became part of the State Military-Industrial Committee of the Republic of Belarus. The introduction of innovative technologies has resulted in unique products previously unproduced not only at the Orsha plant but also at any other State Military-Industrial Committee facility. Certified raw materials or those that have undergone hygienic registration for safety indicators are used in production. To prevent the entry of raw materials and materials that do not meet regulatory requirements, they are subject to incoming inspection according to the parameters established in these documents. 

Gloss & Reuters LLC is the market leader in the Republic of Belarus in the production of stainless steel heated towel rails. The company has been operating since 2010. We are proud of our experience and the quality of our products, and strive to meet the needs of our customers by providing them with reliable and efficient heated towel rails for various operating conditions. 

The Republican subsidiary unitary production enterprise "Konus" of the Republican enterprise "Scientific and Practical Center of the National Academy of Sciences of Belarus for Agricultural Mechanization" provides services for hot-dip galvanizing and thermal diffusion galvanizing of metal products to protect them from corrosion. The plant has the largest hot-dip galvanizing bath in Belarus and one of the largest in Europe, 15 m long, 1.8 m wide and 3.5 m deep, which allows galvanizing metal structures weighing up to 6 tons and with overall dimensions of up to 14 × 1.6 × 3.2 m (L × W × H). Careful preparation of the steel surface, including degreasing with surfactants, etching, washing and fluxing guarantees high quality coating application. 

LLC Plant of metal products "Lagida" is engaged in the production of poles and brackets for outdoor lighting. All products meet the requirements of TU BY 190155984.511-2007. The range of products we offer is wide and varied. We are always ready to fulfill your orders for your unique projects. 

RECHICKIJ METIZNYJ ZAVOD, one of the first companies in the Belarusian metallurgical industry, was founded in 1912 as a manufacturer of nails and wire products. From 2012 to January 2024, RECHICKIJ METIZNYJ ZAVOD was part of the Belarusian Metallurgical Company holding company. Rechitsa Hardware Plant electrogalvanizes and hot-dip galvanizes all types of nails, bolts, nuts, screws, and self-tapping screws, as well as structural components with dimensions not exceeding 12,500 x 1,500 x 2,500 mm (height, width, and length), weighing up to 8,000 kg, and pipes 4.0 to 8.2 m long and 1.2 to 4" in diameter. Hot-dip galvanizing is performed on a Gimeco (Italy) production line, commissioned in 2011. 

Open Joint Stock Company "PromLynx" was established in 1996 on a basis of special engineering and design bureau of the production association "Coral" that specializes in development and utilization of ferrite microwave devices. "PromLynx" success is closely associated with its highly competitive level of production. The company implements a three-dimensional computer product design, uses microprocessor technology in testing new product models and applies new technologies of fast design.

Private Unitary Production Enterprise "NOVY VEK spring" makes  tension springs and extention springs of the wire diameter from 1.2mm to 16mm, as well as the teeth raking grass, earthing devices, the fingers spring for various agricultural machinery. Applications Stainless steel, high level profesionnalny, timely execution of orders, allow to achieve the best results and provides competitiveness. Catalysts are currently more than 50 people work at the plant. We are constantly working to expand the range of products, technical re-equipment and increase production, expand markets in the Republic of Belarus and the CIS.

Mogilev JSC "Krasny Metalist" is the largest manufacturer in the Republic of Belarus of goods for the population made of high-quality stainless steel. Today, the brand "Krasny Metalist" is: time-tested quality; more than 80 years of successful work; 200 employees; contracts with foreign partners; original and always the latest models; round-the-clock quality control. 

OJSC "Kletsk Mechanical Plant" belongs to the machine-building industry and is part of the production association "BELAVTOMAZ". The company is one of the leading suppliers of harness products for MAZ automotive equipment. The company is ready for mutual cooperation and is open to establishing business and partnership relations.

We have been working with restored and used pipes for more than 7 years. We guarantee timely delivery and quality of products to our customers. Used pipes have the widest range of applications. They are used as pipelines for technical purposes, for the construction of drilled-injection and bored piles, arrangement of drainage and reclamation systems, repair of heating mains and pipelines of recycled technical water with an operating pressure of no more than 25 atmospheres, retaining walls, low-pressure and drain pipelines (storm drainage), as protective boxes for critical pipelines under roads and railways (cartridges), as boxes; tongue and groove. 

UЕ "SETGOU" is one of the leaders in the Republic of Belarus in the production of fire doors and other goods in the field of fire safety. Having decided in 1993 to create the company "SETGOU", we set ourselves a very simple, but, in our opinion, important task - to produce high-quality products that are useful to people. The first fire doors, as well as the first fire couplings in Belarus, were produced by our company. And since then, SETGOU has been pioneers in the republic of the latest developments in this segment. 

Our factory was founded in 2000. Its history began with 4 people and the desire to create useful and high-quality products. The main activity of Technotransdetail is the production of springs of various configurations. For over 20 years, we've been honing our skills and gathering new knowledge every day to help create some of the most reliable products on the market. We continue our development. For the convenience of customers, Technotransdetail always has a stock of materials in stock: standard and not only (for example, beryllium wire is always available). This allows us to quickly fulfill each order. 

The status of the customer of the Production unitary enterprise "BELERMA" is an ideal solution for enterprises and individual entrepreneurs who need to get high - quality and reliable prefabricated building structures and metal structures with minimal costs in the shortest possible time. Many years of experience allows us to carry out a full range of work on the development of design documentation, manufacture and installation of prefabricated building structures and metal structures at a high professional level. 

JSC "Vileysky Repair Plant" offers its services for the manufacture of metal structures of various shapes and complexity. We guarantee the production of high-quality products, in a reasonable time, in full compliance with the requirements of regulatory, technical and project documentation. One of our main principles is an individual approach to each client, strict fulfillment of all requests and wishes for our products from the customer. If you want the object you have built to serve reliably and for a long time-use the services of our company!

LLC "Spetslit" is a Belarusian enterprise specializing in the production of cast iron and steel products of various brands. The company supplies foundry products to consumers in Belarus, Russia, and Ukraine. Production capabilities allow us to fulfill orders of cast products for enterprises of such industries as mechanical engineering, transport, machine tool construction, agriculture. Manufactured products using LGM technology are distinguished by the accuracy of casting and the purity of the surface. 

LLC "ARMCON" produces metal structures of prefabricated buildings, high-rise structures, technological metal structures, construction metal structures, embedded parts, metal structures of outdoor advertising, household, enclosing metal structures and IAF. We will equip almost any objects for you" turnkey": factories, industrial buildings, warehouses, logistics centers and terminals, hangars, sports complexes, closed sports grounds, shopping centers, hypermarkets, shops, stalls, agricultural buildings, multi-storey office and residential buildings, car washes, service stations, car dealerships, parking lots and parking sheds. 

Kuzlitmash OJSC is a modern, multi-industry enterprise specializing in the development and manufacture of forging and pressing equipment, foundry equipment, and industrial equipment. Kuzlitmash OJSC is a member of the BELAZ-HOLDING holding company, along with its management company, BELAZ OJSC, and is one of the five largest enterprises in Pinsk. Kuzlitmash OJSC provides installation supervision, commissioning, personnel training, warranty service, and the modernization and repair of forging and pressing and metal-cutting equipment. Improved production technology, modern management methods, and improved equipment quality allow for a flexible approach to completing assigned tasks and meeting the highest customer requirements. 

Zavod Santeks CJSC is a modern metalworking enterprise that produces not only consumer goods and sanitary ware, but also products that have found their wide application in the areas of housing and communal services , agriculture,  as well as in the military-industrial complex, oil refining. During its existence, our company has managed to establish strong ties with trusted reliable suppliers and partners, both on the territory of the Republic of Belarus and abroad. The production activity of the company began in 2002. And this today allows us to offer products of high quality and durability. 

STILPOWERCAP LLC is the main supplier of canning lids in the Republic of Belarus and the CIS countries. The office and production facilities are located in Gomel, Belarus. You will buy branded seaming and screw caps of the Polinka and Gifts of Summer trademarks from us! The quality control system ensures the release of products that meet high standards.

LLC "VL-tekhdetal" offers a wide range of line fittings overhead power lines and metal structures of own production. Our customers can order all steel structures required by them with different types of protective coating (painted or hot-dip galvanized). Cooperation with our company will allow you to get expert advice on the use of all types of our products. 

BELTSVETMET OJSC offers copper rod grade KMor M1or 8.00 mm in accordance with GOST R 53803-2010, manufactured on modern equipment using the fire refining method of secondary copper-bearing materials. Copper rod is a billet with a circular cross-section that is constant along its entire length, rolled into a coil, and produced by continuous casting and rolling. Copper rod coils are supplied on wooden pallets, packaged in accordance with GOST R 53803-2010, weighing from 1 ton to 3.5 tons.

Stalgrit LLC has been representing different kinds of high quality metalware on the market of the Republic of Belarus and abroad for more than 20 years! The company is one of the largest manufacturing exporters in Belarus, a multiple winner and laureate in the nominations "Best Exporter of the Year", "Best Entrepreneur of the Year". Wide international cooperation proves that high quality products of LLC "Stalgrit" are in demand on domestic and foreign markets.

The friendly team of LLC Dregovichi offers prompt and high-quality production of construction metal structures, small architectural forms and improvement elements. All products are manufactured in our own production shop under strict quality control and with clear observance of modern construction GOSTs and SNiPs operating in Belarus and the CIS countries. In addition to manufacturing, we offer the delivery and installation of our metal structures not only in Minsk, but throughout Belarus. We also have successful experience of cooperation with Russian resident companies.

In 2004, in order to strengthen the presence on the CIS market, in the free economic zone in Brest, the production of safes was organized - Safetronics-B FJSC. The founder of FJSC Safetronics-B is Safetronics a.s Banská Bystrica, Slovak Republic. SAFEtronics® products are available in the Russian Federation, Czech Republic, Slovak Republic, Ukraine, Belarus, Poland, Hungary, Serbia, Slovenia and other European countries. SAFEtronics® is an international registered trademark. The company has its own design office and research department, and the products are protected by the registered brand SAFEtronics®.

LLC "Staltehnoprom" offers to your attention the manufacture and installation of metal structures. We can provide a comprehensive solution for the use of metal structures and make almost all types: gates, fences, canopies, visors, road fences and much more. They are often used in the construction of different buildings, as well as engineering structures and can be of a wide purpose. 

SlaVit Plus is a trading and manufacturing company that has been operating in the Belarusian market of perforated fasteners since 2004, so we can offer you high quality fasteners, as evidenced by our recommendations and certificates. Our company has been operating for many years, so you can count on the experience and technical advice of qualified specialists. SlaVit Plus is a certified manufacturer and supplier of engineering components, which is always ready to supply perforated fasteners in any volume and quantity. 

Metizar is a narrowly focused enterprise that has been supplying its customers with only high-quality products for more than ten years. The private enterprise "METIZAR" specializes in the manufacture of crimped, flared and screw-in bushings, racks for mounting printed circuit boards, and many other products according to OST, GOST, drawings and customer samples. We carefully monitor the quality of our products, and we can proudly say that all our customers are moving into the category of permanent ones.

JSC Volkovysk Machine-Building Plant produces manufactures products for foundry, construction and agricultural production. Rich history and unrivaled experience since 1902. Manufactures equipment and spare parts for equipment, metal structures, units and mechanisms (including gear wheels), of any complexity according to customer drawings. Thanks to the production capabilities brought to the maximum, we fulfill orders promptly and efficiently. We offer consumer goods, including can-sealing machines, feed steamers, and containers.

JSC "Orsha Tool Plant" is one of the developed manufacturers in the Republic of Belarus of auxiliary, clamping and metal-cutting tools for metal-working machines. Hundreds of industrial enterprises of the machine-tool and machine-building industries, road and railway transport, energy and agro-industrial complex in Belarus, the Russian Federation and other countries are regular consumers of the plant's products. Implementation is carried out under direct supply contracts and through a distribution network abroad, which covers the industrialized regions of the European part of the Russian Federation and other CIS countries. 

The seaming machine MZP-3V with a semi-automatic movement of the seaming roller is designed for home canning and hermetically sealing glass jars with a neck rim of type I-82 according to GOST 5717-91 with tin lids according to TU 10.244.004-90 during home canning. The roller feed unit is lubricated with a consistent lubricant designed for long-term use, and it is not recommended to disassemble it. Before use, it is necessary to remove the preservation grease from the surface of the machine. Periodically (once a year), it is recommended to lubricate the roller axis with machine oil.  

JSC "VolMet" Volkovysk is the only fully specialized enterprise of the Republic of Belarus producing lock-and-brace products for more than 50 years. The presence of its own tool, foundry, press, galvanic production, as well as assembly shops - allows you to produce special designs of products that are distinguished by high reliability and convenience in use and meet the needs of the most demanding customers, both in terms of volume and terms of production. The products produced by VolMet JSC are focused primarily on the partner and certified in accordance with the requirements of STB ISO 9001-2015 and STB 16949-2018. 

Our company PPUE "InzhMASHlogist" is pleased to offer you reliable, prompt repair of industrial equipment and manufacturing of parts according to the customer's samples and drawings. Restoration of fast-wearing products of machinery and equipment, quarry equipment, concrete pumps, drilling rigs.

We specialize in the production of trading equipment, metal structures, and cash register holders. We design and equip trading halls - equipment and furniture: from racks to ergonomic cash register zones. We construct equipment and furniture on brandbooks and finished drawings or create a design project from scratch. We work with networks according to the rigid standards of the brandbook: we need only two months to design, coordinate, produce, release and mount the equipment to open the store. We successfully work both on the domestic market and for export to Russia, Ukraine, Georgia, Turkey. 

The main activity of our organization is wholesale trade in several areas: steel shot; bentonite products; quartz molding sand; ferroalloys; clad sand. Today, having a base of large customers to whom we supply materials from small quantities to tens of tons, we strive to attract and further mutually beneficial work with other consumers, be they large or not very large enterprises. We value our reputation as a reliable business partner and make every effort to ensure that our customer receives the materials he needs on time and in the required volume. Reliable, long-term partnerships are important to us! 

Today, JSC Mogilevtehmontazh is one of the largest organizations performing a range of construction works, acting as a general contractor / contracting organization for the implementation of projects for both industrial and production purposes of any complexity class. OJSC "Mogilevtehmontazh" is part of RUE "BELSTROYTSENTR" - the management company of the holding "BELSTROYTSENTR-HOLDING". The total number of employees of JSC Mogilevtekhmontazh is more than 600 people. The organization has implemented and certified the quality management system STB ISO 9001-2015, which covers all processes and activities carried out in branches/divisions of JSC Mogilevtekhmontazh that affect the quality and competitiveness of products and services. 

We produce structures for industrial and civil purposes according to customer drawings. We supply finished products throughout the Republic of Belarus and the Russian Federation. ISO production certification. Modern high-level equipment. We will calculate the cost of the product according to the drawing. The calculation is free and takes no more than one business day. Why choose us? Employees have 10 years of experience. Warranty for products up to 15 years. Modern production. Completing work on time. 

The putty unit SO-150B is designed for floor-by-floor feeding and application of putties with a mobility of at least 12 cm, determined according to GOST 5802-86, to the surface being treated, as well as primers, adhesives and water-adhesive compositions, except for acetone-containing and explosive ones. It can be used for injecting a solution with a mobility of at least 8 cm (filler fraction no more than 2.5 mm) when performing repair and restoration work, applying thin plasters, as well as for whitewashing with lime and chalk compositions, disinfecting premises and for spraying preservatives when ensiling feed. A set of accessories for performing the specified work (FMU-25 nozzle, mortar pipeline (D = 25 mm, L = 10 m), air duct (D = 9 mm, L = 20 m)) is supplied by special order.

Batch-action foundry cup mixer with vertically rotating rollers model 15114 is designed to prepare single, filler, facing and core mixtures on sand bases with dust and liquid additives. The mixer is used in mixture preparation departments of foundries. The mixer's operation consists of compacting the mixture with rollers, followed by loosening with moldboards and roller pins in order to envelop the particles of the mixture with clay components. Climatic version type — UHL GOST 15150-69, placement category 4 according to GOST 15150-69. 

The ISL-40 mixing machine (ISL-40 mixer-cooler) is designed to prepare molding sand in conditions where the temperature of the burnt (return) mixture in the bins above the runners is above 45-50C. The ISL-40 mixer is a periodic-action cup mixer with a vortex head and an activator. The mixer includes: a dosing system; a control and monitoring system for the operation of mixers; the ISL-40 mixer. The climatic version of the mixer is UHL category 4 GOST 15150-69.

OJSC Polesieelectromash produces castings from cast iron alloy grades SCh15.20 and VCh50. Maximum dimensions of shaped castings are 420*310*40 mm and weigh from 1 to 20 kg. There is equipment for grate bars, grate beams, barbecues, molds, rollers and other products. Our enterprise has the ability to manufacture castings according to customer drawings, sketches and models. High-tech production of OJSC Polesieelectromash ensures the release of products equipped with the most modern functional capabilities. We guarantee quality, reliability, safety. 

A classic model of heated towel rail in electric design. Electric heated towel rail E2.60 is an excellent option for summer cottages, offices and utility rooms where there is no central heating. The model has a power of 55-60 W, which not only saves electricity, but also quickly and efficiently dries towels and textiles. Installation of heated towel rail E2.60 will not cause problems. It can be quickly and easily fixed to the wall using the holders that come with the kit. Advantages of electric towel warmers Gloss and Reiter: economical power consumption, high heat output, convenient installation without complex installation work, overheating protection system. 

Designer electric heated towel rail PRIMUM for heating and drying textiles. Stylish and functional product for various rooms: bathroom, bedroom, kitchen, living room. We "brought" the heated towel rail out of the bathroom to completely surround our customers with warmth and care. A wide range of colors will allow you to choose a heated towel rail for the desired interior style. Rotary elements in the design of the product provide freedom in the arrangement of textiles. Thanks to our heated towel rail, you will have dry clothes and warm towels all year round. Advantages of electric towel warmers Gloss and Reiter: rotary elements, economical power consumption, high heat output, convenient installation without complex installation work, possibility of hidden connection, overheating protection system, touch control panel, possibility of setting temperature and operating time. 

Electric heated towel rail Ti#1 F6 in chrome color for drying towels and linen, as well as maintaining the microclimate in the bathroom. The heated towel rail with three rotating sections will allow you to freely place towels and textiles for better drying. This ergonomic model is suitable for use in a bathroom of any size. Advantages of electric heated towel rails Gloss and Reiter: rotating design, economical power consumption, high heat output, convenient installation without complex installation work, the possibility of hidden connection, overheating protection system, touch control panel, the ability to set the temperature and operating time. 

Tired of wet towels in the kitchen? We at Gloss & Reiter have come up with a solution! The SMART kitchen electric heated towel rail is specially designed to become your indispensable assistant in everyday life. The product's swivel design allows you to place the heated towel rail in a way that is convenient for you, and its compact size does not require a large area for installation. A heated towel rail in the kitchen space is a new level of comfort from a Belarusian manufacturer. Stylish and functional Gloss & Reiter heated towel rails will always provide you with dry towels at hand while cooking. Advantages of Gloss & Reiter electric heated towel rails: swivel design; economical power consumption; high heat output; convenient installation without complex installation work; possibility of hidden connection; overheating protection system; touch control panel; possibility of setting temperature and operating time. 

JSC "Forging Plant of Heavy Stampings" was founded in 1979 and became an active enterprise on January 1, 1982. It is part of the BELAVTOMAZ holding company. The company carries out the following activities: production of general engineering components and parts; production of finished or semi-finished metal products by forging, pressing, stamping, and rolling. 

The company's main products are cast iron castings made from SCh20, SCh25 (GOST 1412-85) and VCh45, VCh50, and VCh60 (GOST 7293-85) steel, weighing up to 500 kg, and various steel grades. The company has mastered lost-foam casting technology, a method of producing castings using a pattern made from a material that gasifies when molten metal is poured into the mold. The most common material for patterns is expanded polystyrene. Thanks to these technologies, Speсlit LLC guarantees high precision castings. All products are certified.

Artistic cast iron casting is a traditional craft that involves creating decorative and functional objects from molten cast iron. This type of casting dates back to ancient times and is still used to create a variety of items, including sculptures, grates, fireplaces, and garden furniture. Speсlit LLC will custom-make cast iron fence grates, urns, flower boxes, garden and summerhouse gazebos, outdoor and park lamps, and other items. We guarantee high quality and strict adherence to your designs! 

Speсlit LLC offers brake drums and molding tooling of any complexity to the automotive and agricultural machinery industries. Currently, the company manufactures brake drums for leading automotive manufacturers such as MAZ, KAMAZ, and BELAZ, as well as other leading Belarusian and Russian companies. The company's main products are cast iron castings made of SCh20, SCh25 (GOST 1412-85) and VCh45, VCh50, and VCh60 (GOST 7293-85) steels weighing up to 500 kg, as well as various steel grades. 

Spetslit LLC offers domestic and international customers a wide range of iron and steel castings for individual and custom orders, weighing up to 500 kg. We can manufacture the required part based on your sketches or drawings, or our specialists can work with you to prepare drawings or sketches for the required part. The company's main products are cast iron castings made of SCh20, SCh25 (GOST 1412-85) and VCh45, VCh50, and VCh60 (GOST 7293-85) weighing up to 500 kg, as well as various steel grades. 

JSC "Forging Plant of Heavy Stampings" manufactures and sells drop-in anchors – a fundamental type of fastener designed to create ultra-strong and durable connections in concrete and reinforced concrete structures. Its key feature is that it can be installed before the concrete mixture is poured. This allows the component to become a monolithic part of the structure, ensuring maximum pull-out and shear load-bearing capacity. This type of anchor is indispensable for installing columns, heavy industrial equipment, load-bearing beams, fence supports, and canopies. Manufactured from high-strength steel, it is the choice of professionals who demand absolute reliability that lasts for decades. 

JSC "Forging Plant of Heavy Stampings" produces crankshaft forgings for 4- and 6-cylinder engines. The crankshafts are hot-forged from a special steel, ensuring high strength, impact toughness, and durability under cyclic loads. Specifications: weight, kg - 43.7, length L, mm - 737, neck diameter D, mm - 108, neck diameter d, mm - 47. 

JSC "Forging Plant of Heavy Stampings" produces cup-type forgings. Strong, wear-resistant, and ready for further machining, our cup-type forgings (hollow cylindrical blanks) are a key component in the production of parts where smooth operation is essential. Ideal for: heavy engineering, automotive, agricultural, and energy industries.

JSC "Forging Plant of Heavy Stampings" manufactures and sells gear forgings. These are high-strength metal blanks produced by hot die forging. They serve as intermediate blanks for subsequent machining to produce finished gears with a gear ring. Forgings ensure excellent mechanical properties and reliability of the final part. Gear forgings are the optimal starting point for the production of critical components operating under high loads, impacts, and alternating stresses. Compared to blanks produced by casting or directly machined from rolled stock, forged gears offer: high strength and impact toughness; a uniform, dense structure; increased wear resistance; better fatigue characteristics; and material savings. 

Our company offers services metalworking (large park machines, LOW PRICES), and finished products - stoves, heating and baths, greenhouses, gazebos, garden furniture, cooperage products. The ComfortProm company offers materials for interior design - decorative panels and panels, protective screens, polymer-coated ceiling panels, artistic perforation, as well as facade finishing materials - perforated facade panels, including three-dimensional, protective screens.

The Joint Stock Company "Dzerzhinsky Experimental Mechanical Plant" is one of the leading enterprises of the industrial sector of the Republic of Belarus, part of the holding "BELAVTOMAZ" - the management company of the holding JSC "Minsk Automobile Plant". This is a successful, dynamically developing, modern high-tech welding production for the manufacture of bus frames, dump trucks, metal structures and metal forms, as well as the manufacture of non-standard equipment. Today we produce products that meet modern requirements and are used in the automotive industry, civil and industrial construction. 

JSC "Plant "Vetraz" is a large enterprise specializing in the assembly of parts and assemblies for completing products. Over the years, we have gained the image of a reliable and competent partner. Today the plant implements woodworking machines, agricultural winches, feed shredders. In addition, the company manufactures self-tapping screws, metal hoses, construction nails. We are constantly expanding the range of products and the geography of deliveries. Our workshops are equipped with modern equipment, which allows us to produce a large volume of high-quality products. JSC "Plant "Vetraz" will be glad to cooperate with you! 

Our company produces the following aluminum casting alloys: AK5M2, AK7, AK9, AK9M2, AK12, AK12M2. Aluminum casting alloys are specially developed materials used in the casting process. They consist of aluminum as the primary component and also contain other alloying elements, such as copper, magnesium, silicon, zinc, and others, to improve their properties. 

BELTSVETMET OJSC supplies non-ferrous scrap and waste metals, providing a full cycle of procurement, preparation, and processing. BELTSVETMET OJSC maintains a large raw material base of non-ferrous metals and alloys, capable of satisfying the needs of most non-ferrous metallurgy consumers. BELTSVETMET OJSC is competent in handling non-ferrous scrap and waste metals and provides assistance with transaction support and execution. 

Kaskad CJSC, Lida, is a leading national developer and manufacturer of large-scale chandeliers and custom-designed lighting systems for administrative buildings, hotels, churches, theaters, museums, palaces, and other facilities. The company's designers follow the best European lighting traditions and create highly artistic pieces. The company uses artistic casting techniques. Lighting models are recreated at restoration sites dating back to the 16th-19th centuries.

Admetam is a manufacturing company for consumables, parts and spare parts according to drawings, samples and European analogues for production equipment. If you need to make products to order, then choose "Admetam"! And here's why: quality service throughout the ordering process; perform work of any complexity; consultation on modernization of the product and improvement of its wear resistance; we independently develop design documentation and carry out spectral analysis of metals; we perform tasks exactly within the period specified by the customer, send a commercial proposal, and also work urgently; we have pleasant and flexible prices; We are trusted by advanced enterprises. 

Production of unformalized and molded refractories for metallurgy, cement, petroleum, and other industries. As a partner of the Austrian company ECF Consulting GmbH, we offer practical consulting services in the field of ferrous metallurgy. Our services have already been used by our customers - leading manufacturers in the field of ferrous metallurgy in Belarus, Russia, Kazakhstan and Yemen. 

ОJSC MGW the enterprise of a full technological cycle. It has a production area of 110000 square meters. It has more than 3200 units of Metalworking equipment, powerful forging and pressing, thermo and chemical-thermal production units, workshops - tool, power, mechanical repair, agricultural machinery, transport and processing of metal waste. Type of production: from mass and large-scale to single. The production quality management system meets the requirements of the international standard ISO 9001 and STB 16949. The company has a developed infrastructure, has a subsidiary agriculture. Currently, the plant has about 1800 employees.