When organizing the feeding of cattle on his farm, a prudent owner always tries not only to prepare a high-quality, complete feed mixture, but also to minimize its losses during feeding, and in addition, to ensure that its quality is maintained throughout the entire feeding process. And here the Viper Euromilk feed pusher is ready to help the thrifty owner.
The Viper Feed Pusher has two functions: it pushes and softens the PCS (complete feed mix). This is possible through the use of a spiral. It can be equipped with paddles, which further enhance the aeration effect of the feed. Viper is powered by a 125 cm3 hydraulic motor. The auger requires an oil flow of 10 l/min to drive it, making the pusher easy to operate on almost any vehicle equipped with a hydraulic pump. The device has a handle for a three-point linkage, EURO connection and other non-standard options. Optionally, the frames can be equipped with a floating module.
Since the machine is not moving directly in front of the tractor, loader or mini excavator, but slightly next to them, the pushing implement cannot pass or miss the forage. A rubber scraper is installed under the gear behind the auger to keep the entire feed passage clean. To follow the contours of the aft hall, the machine is mounted on three running wheels.
The Viper feed pusher is especially recommended in meat and dairy farming. Why?
It is very important when feeding cattle not only to properly prepare the feed mixture, but also to maintain its quality throughout the entire feeding process. This reduces the sorting of feed by the animals and contributes to the receipt of a complete diet, which in turn provides them with good health, increases milk yield and increases muscle mass.
The Viper feed pusher allows for efficient mixing of uneaten feed residues. During its operation, it aerates and loosens the feed, which has a very good effect on the quality of the feed and prevents it from heating up.
The Viper Euromilk feed pusher is available in three versions with a working width of 1.2; 1.5 and 2.0 meters. All models have one hydraulically driven auger. The diameter is 47 cm, and the coil thickness is 8 mm. The principle of operation of the unit is as simple as possible: the equipment pushes the feed to the feed grate.
As standard, the equipment is equipped with a three-point clutch for front linkage. For a small surcharge, the implement can also be equipped with a Euro-connection. Other connections are available on request.
You can purchase the Euromilk Viper Feed Pusher from the official dealer - Beleksalto LLC. All offers of LLC "Belexalto" are accompanied by warranty, service and original spare parts. A wide range of models of equipment for feeding cattle, with their detailed description, is presented on the company's website: https://belexalto.com/
P.S. In the next article, we will talk about another innovative equipment supplied by the Belarusian company Beleksalto LLC for personal dairy farms, - milking machines of the Turkish brand Melasty.